Dana drilled some holes for more lights, and yes this set-up IS OSHA approved~
We had a bear making regular, nightly visits through the neigborhood~
Bandit worked way too hard and had to nap, often~
And we worked alot on the roof. All the insulation came in 4'X8' sheets so they all had to be cut to fit between the stringers. We did two layers of insulation, so there was lots of cutting/fitting going on.
Once we got all the insulation in we were able to start sheeting~
Remember, it's 27' to the peak on this side, and the 10/12 pitch of the roof makes it very difficult to work on~
Almost got the front side sheeted, just some small pieces left to cut into place~
Once the front side was done, we moved around to the back side. This section of roof is above our dining room~
We had a bear making regular, nightly visits through the neigborhood~
Bandit worked way too hard and had to nap, often~
And we worked alot on the roof. All the insulation came in 4'X8' sheets so they all had to be cut to fit between the stringers. We did two layers of insulation, so there was lots of cutting/fitting going on.Once we got all the insulation in we were able to start sheeting~
Remember, it's 27' to the peak on this side, and the 10/12 pitch of the roof makes it very difficult to work on~
Almost got the front side sheeted, just some small pieces left to cut into place~
Once the front side was done, we moved around to the back side. This section of roof is above our dining room~ 
No comments:
Post a Comment